Loading ...
Loading ...
Loading ...
Fasten the flooring
Fig. 134
fixing the floor covering
Read and observe and on page 103 first.
The flooring can be fastened with the hook to the strip on the left side of the
luggage compartment.
›
Move the front hook
A
as far forward as possible and fold it down as far as
it will go » Fig. 134.
›
Fasten the flooring hook
B
in front of the hook
A
that has been folded
down.
CAUTION
The flooring covering may be only fastened to this strip with the boot open.
Before closing the lid, check that the flooring is not fastened to the strip -
there is a risk of damage to the luggage compartment cover.
Floor covering on both sides
Read and observe
and on page 103 first.
A double-sided floor covering can be fitted in the luggage compartment. One
side is made of fabric, the other side is washable (suitable for transporting wet
or dirty items ).
Luggage compartment cover
Fig. 135 Remove the luggage compartment cover
Fig. 136
Luggage compartment cover stowed behind the rear seats
Read and observe and on page 103 first.
If the retaining straps
A
» Fig. 135 are attached to the boot lid, then opening
the lid will also raise the luggage compartment cover (hereafter only referred
to as "cover").
The cover may be removed from the vehicle or stored in front of the bracket
D
» Fig. 136.
Removing
›
On both sides of the boot lid, unhook the straps
A
in the direction of arrow
1
» Fig. 135.
›
Hold the raised cover and press on the two sides on the underside of the
cover in the area of the recess
C
.
›
Remove the cover in the direction of the arrow
2
.
106
Operation
Loading ...
Loading ...
Loading ...