Loading ...
Loading ...
Loading ...
Function
Fig. 270 Instrument cluster display: Examples of Speed Limiter status
displays
Read and observe on page 227 first.
Speed limiter status displays » Fig. 270
Speed limit is set, control is inactive (in the colour display the digits of
speed limits is shown in grey).
Control active (in the colour display the digits of the speed limits are high-
lighted).
No speed limit set.
System fault - seek assistance from a specialist garage immediately.
Basic requirements for start of control
The Speed Limiter is activated.
The current speed is greater than approx. 30 km/h.
After starting the system, the current speed is set as the speed limit, the warn-
ing light lights up in the instrument cluster.
Exceeding the speed limit during the regulation
If, during the control, it is necessary to exceed the speed limit (e.g. to over-
take), the accelerator pedal must be pressed fully.
When exceeding the speed limit (e.g. driving down a hill), an acoustic signal
sounds and the warning light flashes in the instrument cluster.
The regulation is resumed once the speed has fallen below the set limit.
Operation description - Variant without CCS
Fig. 271
Controls of the speed limiter
(version without CCS)
Read and observe
on page 227 first.
Overview of the speed limiter controls » Fig. 271
A
Activate speed limiters
Interrupt control (spring-tensioned position)
Disable speed Limiter (delete set limit )
B
Take control again
a)
/ increase speed limit - press (in increments
of 1 km/h), hold (in increments of 10 km/h)
C
Start control/ reduce speed limit - press (in increments of 1 km/h),
hold (in increments of 10 km/h)
a)
If no speed limit is set, the current speed is set as the speed limit.
228
Driving
Loading ...
Loading ...
Loading ...