Loading ...
Loading ...
Loading ...
■
Trailer recognition
■
Show road signs relevant to trailers
- Activating / deactivating the display of road
signs relevant to trailers
■
Use for route calculation
- Activation / deactivation taking trailers in account
for route calculation in navigation
■
Maximum speed for trailer
- Set the top speed for towing a trailer
Operation
Fig. 285
Sensor for traffic sign recogni-
tion
Fig. 286 Instrument cluster display: Display examples
Read and observe on page 243 first.
Description of indications and displayed traffic signs
Display » Fig. 286
Display of detected traffic signs » page 51, Driving data (Multifunction
display)
Additional display (monochromatic display)
Additional display (colour display)
The system can display the following (vertical) traffic signs where identified.
▶
Speed limit.
▶
Overtaking prohibited.
Additional signs, such as 'when wet' or signs which only apply for a limited time
can also be displayed.
The system displays only traffic signs that are in the “viewing area” of the sen-
sor » Fig. 285.
Data from the sensor is supplemented by information from the Infotainment
Navigation. This is the reason why traffic signs with maximum speeds can also
be shown on sections of roads which do not have any traffic signs.
Warning when exceeding the speed limit
The warning when exceeding the permissible speed (based on the detected
traffic sign) can be activated and set in Infotainment» page 243.
Mode when towing a trailer
For vehicles with a factory-fitted towing device, in Infotainment it is possible
to enable or disable the relevant traffic signs for trailer operation and the top
speed for towing a trailer » page 243, Settings in Infotainment.
Note
If, for example, you are on a motorway without speed limits, then a road sign
relating to the end of all limits is shown in the instrument cluster display.
Additional display
Read and observe on page 243 first.
If the menu item Road sign is currently not shown » Fig. 286 on page 244 - ,
the road sign with the speed limit will appear in the upper display area of the
instrument cluster » Fig. 286 on page 244 - , .
If several traffic signs are detected simultaneously, in some cases the next
traffic sign will also be displayed in the colour display - » Fig. 286 on page 244
- .
All detected traffic signs can be displayed via the multifunction display in the
menu item Traffic Sign Recognition » Fig. 286 on page 244 - .
The additional display can be activated / deactivated in Infotain-
ment» page 243.
244
Driving
Loading ...
Loading ...
Loading ...