Loading ...
Loading ...
Loading ...
Fig. 284 Colour display of the instrument cluster: Examples of system
indications
Read and observe and on page 240 first.
System displays » Fig. 283 and » Fig. 284
The system is active, but not ready to intervene.
The system is active and ready to intervene.
The system intervenes when approaching the right-hand boundary lane.
Adaptive tracking takes place.
The system can intervene when the following basic conditions are present.
The system is activated.
The vehicle speed is higher than about 65 km/h (not applicable to vehicles
with the traffic jam assistant » page 242).
The boundary line of at least one side of the lane is detected.
The driver's hands are on the steering wheel.
The lane is more than 2.5 m in width.
If the turn signal is switched on (e.g. when turning), no steering intervention
takes place when the vehicle approaches the boundary line. The system re-
gards the situation as an intended lane change.
Warning lights in the instrument cluster
The system is active, but not ready to intervene.
The system is active and ready to intervene or is currently intervening.
Adaptive lane guidance
Adaptive tracking helps to keep the vehicle in the position between the boun-
dary lines selected by the driver, by means of steering intervention.
If the position within the lane is changed, the system quickly adapts and holds
the newly-selected position.
Steering wheel vibrations
In the following situations, it may occasionally be the case that due to the
steering wheel vibrations the syst4em indicates that a driver steering interven-
tion is required.
▶
The system is not able to keep the vehicle by a within the lane due to a steer-
ing intervention.
▶
During an intense system-related steering intervention, the system suddenly
cannot recognize the boundary lines.
WARNING
The system function may be restricted if, for example there is danger due
to ruts on a downhill road or in a crosswind.
Activation / deactivation
Read and observe and on page 240 first.
The activation/deactivation of the system can be carried out in one of two
ways.
▶
In the instrument cluster display » page 54,
Assist systems
menu item.
▶
In Infotainment » page 240, Settings in Infotainment.
Adaptive tracking can also be enabled or disabled In Infotainment.
After switching off and switching on the ignition, the system setting is re-
tained.
Note
The system setting is stored (depending on Infotainment type) in the active
user account personalisation » page 55.
Malfunctions
Read and observe and on page 240 first.
If the system is not available, an appropriate message appears in the display of
the instrument cluster.
241
Assist systems
Loading ...
Loading ...
Loading ...