Loading ...
Loading ...
Loading ...
Adjust the temperature for the left side (or for both sides)
1)
▶
Reduce the temperature/ Increase the temperature
Adjust the temperature for the right side (or for both sides)
2)
▶
Reduce the temperature/ Increase the temperature
Depending on equipment fitted:
▶
Auxiliary heating and ventilation on / switch off » page 118
▶
Switching the Climatronic system off
Interior temperature sensor
Switch recirculation on/off » page 115
Intense air flow to the windscreen on / off (when switching on, the air
flow to the windows and is also switched on)
Switch the rear window heating on/off » page 76
Switching the windscreen heater on/off » page 76
Setting Climatronic in Infotainment (also operate with some functions)
Synchronize the temperature inside the entire vehicle according to the
temperature setting on the driver's side
Switching automatic mode on » page 115
Switch the cooling system on/off
When the function is switched on, an indicator lamp lights up inside or below
the button.
Setting temperature
The temperature can be set on the Climatronic control unit or in Infotain-
ment» page 114. In the range between 16 ° C to 29.5 ° C, an automatic tem-
perature control takes place.
At a temperature setting below 16°C, lights up in the temperature display,
the Climatronic functions with maximum cooling performance.
At a temperature setting over 29.5°C, lights up in the temperature display,
the Climatronic functions with maximum heating output.
CAUTION
Do not cover the interior temperature sensor
H
» Fig. 149 - the function of
the Climatronic could be affected.
E
F
G
H
Note
■
In order to ensure adequate thermal comfort, there may be an increase in en-
gine idle speed during operation of the Climatronic in some circumstances.
■
The setting of the Climatronic is stored in the active user account personali-
sation » page 55.
Operate Climatronic in Infotainment
Fig. 150
Infotainment: Example display
of the main Climatronic menu
Read and observe on page 112 first.
›
To display the main menupress the button
on the Climatronic control
unit.
Function surfaces and screen display » Fig. 150.
A
Displays the current operation mode (or set the operation mode) of
the Climatronic
B
Set the desired temperature, front - left side
C
Set the desired temperature, front - right side
D
Setting the power in operation
E
Switching on/off and adjusting the fan speed, cooling system, air dis-
tribution and air recirculation
a)
Colour representation of the air flow from the air vents at the front
(Blue colour - temperature reduction / red colour - temperature in-
crease)
Switching on/off the Climatronic
1)
Applies to left-hand drive vehicles.
2)
Applies to right-hand drive vehicles.
114
Operation
Loading ...
Loading ...
Loading ...