Loading ...
Loading ...
Loading ...
›
Continue driving forwards until appears in the display.
›
Stop and ensure that the vehicle does not continue to move forward until the
parking procedure starts.
›
Select reverse gear or move the selector lever into position R.
›
As soon as the following message is shown in the display:
Steering int. active. Be
mindful of your surroundings
, let go of the steering wheel and the steering is tak-
en over by the system.
›
Observe the direct vicinity of the vehicle and reverse carefully.
If necessary, the parking procedure can be continued with further steps.
›
If the arrow in the information display is flashing to the front , engage
1st gear or move the selector lever into the position D/S.
The display shows the icon (brake pedal).
›
Depress the brake pedal and wait until the steering wheel automatically ro-
tates into the required position, the symbol
goes out.
›
Carefully drive forwards.
›
If the backwards arrow is flashing in the display -
, select reverse gear again
or move the selector lever into position R.
The display shows the
icon (brake pedal).
›
Depress the brake pedal and wait until the steering wheel automatically ro-
tates into the required position, the symbol
goes out.
›
Carefully move backwards.
You can repeat these steps several times in succession.
As soon as the parking procedure is complete, an audible signal sounds and the
following message appears in the display.
Parking forwards
Fig. 267
To park forwards in a traverse parking space: Display
Read and observe and on page 222 first.
The system supports the driver when parking forward in the parking space
found in a number parallel parked vehicles.
As soon as the system finds a parking space, select the » Fig. 263 on
page 223 button for forwards parking mode » Fig. 264 on page 224 - .
» Fig. 267 Is shown in the display.
The further procedure is analogous to that for reverse parking.
›
Follow the system instructions shown in the display.
As soon as the parking procedure is complete, an audible signal sounds and the
following message appears in the display.
The system is activated by pressing the
button and this is also possible if the
vehicle has already been partially moved to a suitable parking space.
Leaving a parallel parking space
Read and observe and on page 222 first.
The system supports the driver when leaving a parking space of a parallel
parking space.
Leaving a parking space process
›
Press the
» Fig. 263 on page 223 button.
The following message is displayed:
Please indicate and engage reverse gear.
›
Activate the turn signal for side of the vehicle where the parking space is out
of which you wish to manoeuvre.
›
Select reverse gear or move the selector lever into position R.
The further procedure is analogous to that for reverse parking.
›
Follow the system instructions shown in the display.
As soon as the parking procedure is complete, an audible signal sounds and the
following message appears in the display.
If the parking space is too small, it is not possible to use the system to leave
the parking space. A corresponding message is shown in the information clus-
ter display.
225
Assist systems
Loading ...
Loading ...
Loading ...