Loading ...
Loading ...
Loading ...
Driving data (Multifunction display)
Introduction
The driving data display is only possible with the ignition switched on. After
the ignition is switched on, the function that was last selected before switch-
ing off the ignition is displayed.
If the journey data in the instrument cluster display after switching on the igni-
tion, select the menu item
Journey data
in the main menu and confirm
» page 53.
The units can be adjusted in Infotainment in the menu
/ → →
Units
.
The journey data can be set/reset in Infotainment in the menu
/ → →
Instrument cluster
.
Note
The setting of the information display is stored in the active user account per-
sonalisation » page 55.
Information Overview
Overview of driving data (depending on the vehicle equipment).
Range - drive distance in km which can be covered with the existing tank ca-
pacity and with the same driving style. If you drive more efficiently this value
can increase.
AdBlue
®
range - drive distance in km which can be covered with the existing
AdBlue
®
tank capacity and with the same driving style. If you drive more effi-
ciently this value can increase.
Average fuel consumption - is calculated continuously since the last time the
memory was deleted. After erasing the memory, no data will appear for the
first 100 m driven.
Current fuel consumption - when the vehicle is stationary or slowly moving,
the fuel consumption is displayed in l/h (--,- km/l appears on models for some
countries).
Oil temperature - if the temperature is lower than 50 °C or if there is a fault in
the system for checking the oil temperature, the symbols are displayed.
Warning when the preset speed is exceeded - allows the setting of a speed
limit where, if exceeded, an acoustic warning signal and a warning message ap-
pears on the display of the instrument cluster.
Dynamic Road Sign Display - traffic signs display » page 243, Traffic sign rec-
ognition.
Current speed - digital speedometer.
Average speed - is calculated continuously since the last time the memory
was deleted. After erasing the memory, no data will appear for the first 300 m
driven.
Driving route - distance driven since the last time the memory was deleted.
Driving time - driving time since the last time the memory was deleted.
Convenience consumers - information about the total consumption of the
comfort consumers in l/h and a list of three consumers (e.g. air conditioning
etc.), which have the largest share of fuel consumption.
Infotainment display
Fig. 39
Journey data
›
In Infotainment in the menu
/ Tap on function surface →
Driving data
.
Screen display » Fig. 39
Distance travelled
Driving time
Average speed
Average fuel consumption
Transit point rating (
DriveGreen
Function)
A
B
C
D
E
51
Information system
Loading ...
Loading ...
Loading ...