Loading ...
Loading ...
Loading ...
Removing bulbs for low and main beam
Fig. 338 Removing bulbs for low and main beam
Read and observe and on page 290 first.
›
Remove the protective caps
A
and
B
» Fig. 337 on page 290.
›
Press the latch
A
on the holder in the direction of the arrow
1
» Fig. 338.
›
Remove the connector to the bulb in the direction of arrow
2
.
›
Remove the connector.
›
Plug the connector into the new bulb so that the fixing lug
B
on the bulb
points upwards.
›
Insert the connector, with the bulb, into the headlight opposite to the direc-
tion of arrow
2
until you feel it lock into place.
Change the light bulb for the parking light
Fig. 339
Change the light bulb for the parking light
Read and observe and on page 290 first.
›
Remove the protective cap
B
» Fig. 337 on page 290.
›
Press the attachment securing lugs in the direction of arrows
1
, and care-
fully pull out the bulb holder with the bulb.
›
Grasp the holder in area
A
.
›
Remove the faulty bulb from the holder in the direction of the arrow
2
.
›
Insert a new bulb in the holder until it stops.
›
Insert the holder with bulb into the headlight again.
›
Fit protective cap
B
» Fig. 337 on page 290.
Changing the bulb for the front turn signal light
Fig. 340
Changing the bulb for the front turn signal light
Read and observe and on page 290 first.
›
Remove the protective cap
B
» Fig. 337 on page 290.
›
Remove the holder with the bulb by jiggling it out in the direction of the ar-
row
1
» Fig. 340.
›
Hold the holder with the bulb at the position shown by the arrows.
›
Remove the faulty bulb from the holder in the direction of the arrow
2
.
›
Insert a new bulb in the holder until it stops.
›
Slide the holder with the bulb with the fixing lug
B
upwards so that it fits
into the recess on the reflector.
›
Fit protective cap
B
» Fig. 337 on page 290.
291
Fuses and light bulbs
Loading ...
Loading ...
Loading ...