Loading ...
Loading ...
Loading ...
EN-5
Before using for the first time
A display test is carried out for 10 seconds after the
appliance has been installed and after a power cut. The fan
comes on at the same time. The appliance cannot be used
during this time.
Please stick the extra data plate for the appliance supplied
with this documentation in the space provided in the "After
sales service, data plate" section of this booklet.
Cleaning and heating up for the first time
Remove any protective foil and sticky labels.
Remove the anti-slip mat and, if applicable, the rack from
the drawer, and sponge both with warm water and a little
washing-up liquid. Dry using a soft cloth.
Wipe the appliance inside and out with a damp cloth only,
and then dry with a soft cloth.
Replace the anti-slip mat and the rack (if applicable) in the
drawer.
Then heat the empty drawer for at least two hours.
Switch the appliance on by touching the sensor.
Touch the sensor repeatedly until the LED light.
Touch the sensor repeatedly until the LED on the far
right lights up.
Touch the sensor repeatedly until 2h lights up.
Close the drawer.
The warming drawer is fitted with a soft close self-closing
mechanism.
It also has a contact switch, which ensures that the
heating element and fan in the appliance only work when
the drawer is closed.
Metal components have a protective coating which may
give off a slight smell when heated up for the first time.
The smell and any vapours will dissipate after a short time,
and do not indicate a faulty connection or appliance.
Ensure that the kitchen is well ventilated whilst the
appliance is being heated up for the first time.
Guide to the appliance
For appliances with no handle: Press the middle of the drawer to open or close it.
When opening, the drawer pops out slightly. You can then pull it out towards you.
Control panel
Anti-slip mat: For keeping crockery secure(Optional accessories)
Loading ...
Loading ...
Loading ...