Loading ...
Loading ...
Loading ...
DTC P2122, P2123 APP SENSOR
EC-823
[QR (WITHOUT EURO-OBD)]
C
D
E
F
G
H
I
J
K
L
M
A
EC
6. REPLACE ACCELERATOR PEDAL ASSEMBLY
1. Replace the accelerator pedal assembly.
2. Perform EC-562, "
Accelerator Pedal Released Position Learning" .
3. Perform EC-563, "
Throttle Valve Closed Position Learning" .
4. Perform EC-563, "
Idle Air Volume Learning" .
>> INSPECTION END
7. CHECK INTERMITTENT INCIDENT
Refer to EC-626, "
TROUBLE DIAGNOSIS FOR INTERMITTENT INCIDENT" .
>> INSPECTION END
Component Inspection BBS001SJ
ACCELERATOR PEDAL POSITION SENSOR
1. Reconnect all harness connectors disconnected.
2. Turn ignition switch ON.
3. Check voltage between ECM terminals 106 (APP sensor 1 sig-
nal), 98 (APP sensor 2 signal) and ground under the following
conditions.
4. If NG, replace accelerator pedal assembly and go to the next
step.
5. Perform EC-562, "
Accelerator Pedal Released Position Learning" .
6. Perform EC-563, "
Throttle Valve Closed Position Learning" .
7. Perform EC-563, "
Idle Air Volume Learning" .
Removal and Installation BBS001SK
ACCELERATOR PEDAL
Refer to ACC-2, "ACCELERATOR CONTROL SYSTEM" .
Terminal Accelerator pedal Voltage
106
(Accelerator pedal position
sensor 1)
Fully released 0.5 - 1.0V
Fully depressed 3.9 - 4.7V
98
(Accelerator pedal position
sensor 2)
Fully released 0.15 - 0.6V
Fully depressed 1.95 - 2.4V
MBIB0023E
Loading ...
Loading ...
Loading ...