Loading ...
Loading ...
Loading ...
EC-1632
[YD (WITHOUT EURO-OBD)]
DTC P0336 CKP SENSOR
Specification data are reference values and are measured between each terminal and ground.
Pulse signal is measured by CONSULT-II.
CAUTION:
Do not use ECM ground terminals when measuring input/output voltage. Doing so may result in dam-
age to the ECM's transistor. Use a ground other than ECM terminals, such as the ground.
: Average voltage for pulse signal (Actual pulse signal can be confirmed by oscilloscope.)
TERMI-
NAL
NO.
WIRE
COLOR
ITEM CONDITION
DATA
(DC Voltage and Pulse Signal)
46 L Crankshaft position sensor
[Engine is running]
● Warm-up condition
● Idle speed
NOTE:
The pulse cycle changes depending on rpm at
idle.
0 - 6V
[Engine is running]
● Warm-up condition
● Engine speed: 2,000 rpm
0 - 6V
65 L/R
Crankshaft position sen-
sor ground
[Engine is running]
● Warm-up condition
● Idle speed
Approximately 0.3V
67 —
Sensor ground
(Sensors shield circuit)
[Engine is running]
● Warm-up condition
● Idle speed
Approximately 0.3V
82 B
Sensor power supply
(Accelerator pedal posi-
tion sensor 1 / Crankshaft
position sensor)
[Ignition switch ON] Approximately 5.3V
MBIB0879E
MBIB0880E
Loading ...
Loading ...
Loading ...