Loading ...
Loading ...
Loading ...
EC-1220
[YD (WITH EURO-OBD)]
DTC P0380 GLOW RELAY
DTC P0380 GLOW RELAY PFP:25230
On Board Diagnosis Logic BBS00219
DTC Confirmation Procedure BBS0021A
NOTE:
If DTC Confirmation Procedure has been previously conducted, always turn ignition switch OFF and wait at
least 10 seconds before conducting the next test.
WITH CONSULT-II
1. Turn ignition switch ON.
2. Select “DATA MONITOR” mode with CONSULT-II.
3. Wait at least 5 seconds.
4. If 1st trip DTC is detected, go to EC-1222, "
Diagnostic Proce-
dure" .
WITH GST
Follow the procedure “WITH CONSULT-II” above.
DTC No. Trouble diagnosis name DTC detecting condition Possible cause
P0380
0380
Glow relay circuit
An excessively low voltage is sent to ECM
through glow relay.
● Harness or connectors
(The glow relay circuit is open
or shorted.)
● Glow relay
An excessively high voltage is sent to ECM
through glow relay.
● Harness or connectors
(The glow relay circuit is
shorted.)
● Glow relay
SEF817Y
Loading ...
Loading ...
Loading ...