Loading ...
Loading ...
Loading ...
DTC P1211 TCS CONTROL UNIT
EC-1701
[YD (WITHOUT EURO-OBD)]
C
D
E
F
G
H
I
J
K
L
M
A
EC
DTC P1211 TCS CONTROL UNIT PFP:47850
Description BBS002DI
The malfunction information related to TCS is transferred through the CAN communication line from ESP/
TCS/ABS control unit to ECM.
Be sure to erase the malfunction information such as DTC not only for ESP/TCS/ABS control unit but
also for ECM after TCS related repair.
On Board Diagnosis Logic BBS002DJ
The MI will not light up for this self-diagnosis.
DTC Confirmation Procedure BBS002DK
NOTE:
If DTC Confirmation Procedure has been previously conducted, always turn ignition switch OFF and wait at
least 10 seconds before conducting the next test.
WITH CONSULT-II
1. Turn ignition switch ON.
2. Select “DATA MONITOR” mode with CONSULT-II.
3. Wait at least 5 seconds.
4. If DTC is detected, go to EC-1701, "
Diagnostic Procedure" .
WITHOUT CONSULT-II
1. Turn ignition switch ON and wait at least 5 seconds.
2. Turn ignition switch OFF, wait at least 10 seconds and then turn ON.
3. Perform Diagnostic Test Mode II (Self-diagnostic results) with ECM.
4. If DTC is detected, go to EC-1701, "
Diagnostic Procedure" .
Diagnostic Procedure BBS002DL
Go to BRC-52, "TROUBLE DIAGNOSIS" (models with ESP) or BRC-9, "TROUBLE DIAGNOSIS" (model
without ESP).
DTC No. Trouble diagnosis name DTC detecting condition Possible cause
P1211
1211
TCS control unit
ECM receives a malfunction information from
ESP/TCS/ABS control unit.
● ESP/TCS/ABS control unit
● TCS related parts
SEF817Y
Loading ...
Loading ...
Loading ...