Loading ...
Loading ...
Loading ...
DTC P2118 THROTTLE CONTROL MOTOR
EC-1373
[YD (WITH EURO-OBD)]
C
D
E
F
G
H
I
J
K
L
M
A
EC
6. REPLACE ELECTRIC THROTTLE CONTROL ACTUATOR
With CONSULT-II
1. Replace the electric throttle control actuator.
2. Turn ignition switch ON and OFF.
3. Turn ignition switch ON and select “TARGET ETC ANGLE” in
“ACTIVE TEST” mode.
4. Make sure that throttle valve operates correctly.
Without CONSULT-II
1. Replace the electric throttle control actuator.
2. Turn ignition switch ON and OFF.
3. Turn ignition switch ON and OFF, and make sure that throttle
valve operates correctly.
>> INSPECTION END
Component Inspection BBS002LF
THROTTLE CONTROL MOTOR
1. Disconnect electric throttle control actuator harness connector.
2. Check resistance between terminals 5 and 6.
3. If NG, replace electric throttle control actuator.
Removal and Installation BBS002LG
ELECTRIC THROTTLE CONTROL ACTUATOR
Refer to EM-145, "Removal and Installation" .
PBIB3206E
Resistance: Approximately 0.3 - 100 Ω [at 25°C(77°)]
PBIB2606E
Loading ...
Loading ...
Loading ...