Loading ...
Loading ...
Loading ...
EC-1570
[YD (WITHOUT EURO-OBD)]
DTC P0182, P0183 FUEL PUMP TEMPERATURE SENSOR
DTC P0182, P0183 FUEL PUMP TEMPERATURE SENSOR PFP:16700
Description BBS0029G
Fuel pump temperature sensor (1) is built in the fuel pump (2). The
sensor detects the fuel temperature in the fuel pump and calibrates
the fuel injection amount change by fuel temperature.
CONSULT-II Reference Value in Data Monitor Mode BBS0029H
Specification data are reference values.
On Board Diagnosis Logic BBS0029I
The MI will not light up for these self-diagnoses.
DTC Confirmation Procedure BBS0029J
NOTE:
If DTC Confirmation Procedure has been previously conducted, always turn ignition switch OFF and wait at
least 10 seconds before conducting the next test.
WITH CONSULT-II
1. Turn ignition switch ON.
2. Select “DATA MONITOR” mode with CONSULT-II.
3. Wait at least 5 seconds.
4. If DTC is detected, go to EC-1572, "
Diagnostic Procedure" .
WITHOUT CONSULT-II
1. Turn ignition switch ON and wait at least 5 seconds.
2. Turn ignition switch OFF, wait at least 10 seconds and then turn ON.
3. Perform Diagnostic Test Mode II (Self-diagnostic results) with ECM.
4. If DTC is detected, go to EC-1572, "
Diagnostic Procedure"
MBIB1389E
MONITOR ITEM CONDITION SPECIFICATION
FUEL TEMP SEN
● Engine: After warming up More than 40°C (104°F)
DTC No. Trouble diagnosis name DTC detecting condition Possible cause
P0182
0182
Fuel pump temperature
sensor circuit low input
An excessively low voltage from the sensor is
sent to ECM.
● Harness or connectors
(The sensor circuit is open or
shorted.)
● Fuel pump temperature sensor
P0183
0183
Fuel pump temperature
sensor circuit high input
An excessively high voltage from the sensor is
sent to ECM.
SEF817Y
Loading ...
Loading ...
Loading ...