Loading ...
Loading ...
Loading ...
DTC P0200 FUEL INJECTOR
EC-1151
[YD (WITH EURO-OBD)]
C
D
E
F
G
H
I
J
K
L
M
A
EC
DTC P0200 FUEL INJECTOR PFP:16600
On Board Diagnosis Logic BBS001Z9
DTC Confirmation Procedure BBS001ZA
NOTE:
If DTC Confirmation Procedure has been previously conducted, always turn ignition switch OFF and wait at
least 10 seconds before conducting the next test.
WITH CONSULT-II
1. Turn ignition switch ON.
2. Select “DATA MONITOR” mode with CONSULT-II.
3. Start engine and let it idle for at least 5 seconds.
4. If 1st trip DTC is detected, go to EC-1151, "
Diagnostic Proce-
dure" .
WITH GST
Follow the procedure “WITH CONSULT-II” above.
Diagnostic Procedure BBS001ZB
1. INSPECTION START
With CONSULT-II
1. Turn ignition switch ON.
2. Select “SELF DIAG RESULTS” mode with CONSULT-II.
3. Touch “ERASE”.
4. Perform EC-1151, "
DTC Confirmation Procedure" , again.
5. Is 1st trip DTC P0200 displayed again?
With GST
1. Turn ignition switch ON.
2. Select Service $04 with GST.
3. Perform EC-1151, "
DTC Confirmation Procedure" , again.
4. Is 1st trip DTC P0200 displayed again?
Yes or No
Yes >> GO TO 2.
No >> INSPECTION END
DTC No. Trouble diagnosis name DTC detecting condition Possible cause
P0200
0200
Fuel injector power supply
circuit
ECM detects a voltage of power source for the
fuel injector is excessively high or low.
● ECM
SEF817Y
Loading ...
Loading ...
Loading ...