Loading ...
Loading ...
Loading ...
EC-1276
[YD (WITH EURO-OBD)]
DTC P0504 ASCD BRAKE SWITCH
DTC confirmation Procedure BBS00229
CAUTION:
Always drive vehicle at a safe speed.
NOTE:
If DTC Confirmation Procedure has been previously conducted, always turn ignition switch OFF and wait at
least 10 seconds before conducting the next test.
TESTING CONDITION:
Steps 3 and 4 may be conducted with the drive wheels lifted in the shop or by driving the vehicle. If a
road test is expected to be easier, it is unnecessary to lift the vehicle.
WITH CONSULT-II
1. Start engine (ESP switch OFF).
2. Select “DATA MONITOR” mode with CONSULT-II.
3. Press MAIN switch and make sure that CRUISE indicator lights
up.
4. Drive the vehicle for at least 5 consecutive seconds under the
following condition.
If DTC is detected, go to EC-1278, "
Diagnostic Procedure" .
If DTC is not detected, go to the following step.
5. Drive the vehicle for at least 5 consecutive seconds under the
following condition.
6. If DTC is detected, go to EC-1278, "
Diagnostic Procedure" .
WITH GST
Follow the procedure “WITH CONSULT-II” above.
VHCL SPEED SE More than 5 km/h (3 MPH)
Shift lever Suitable position
VHCL SPEED SE More than 5 km/h (3 MPH)
Shift lever Suitable position
Driving location
Depress the brake pedal for more than
five seconds so as not to come off from
the above-mentioned condition.
MBIB1085E
Loading ...
Loading ...
Loading ...