Loading ...
Loading ...
Loading ...
EC-1000
[YD (WITH EURO-OBD)]
BASIC SERVICE PROCEDURE
A/F Sensor Learning Value Clear BBS002M0
DESCRIPTION
ECM learns the output characteristic of A/F sensor 1 to perform the control of DPF regeneration precisely. A/F
sensor learning value should be cleared under the following conditions.
● A/F sensor 1 is changed.
● ECM is replaced with used one which stores the A/F Sensor Learning Value of another A/F sensor 1.
OPERATION PROCEDURE
1. Turn ignition switch ON.
2. Select “A/F SEN LEAN CLR” in “WORK SUPPORT” mode with
CONSULT-II.
3. Touch “CLEAR” and wait a few seconds.
4. Make sure that “CMPLT” is displayed on CONSULT-II screen.
PBIB3174E
PBIB3175E
PBIB3177E
Loading ...
Loading ...
Loading ...