Loading ...
Loading ...
Loading ...
EC-1666
[YD (WITHOUT EURO-OBD)]
DTC P0563 BATTERY VOLTAGE
3. CHECK JUMPER CABLES INSTALLATION
Check that the jumper cables are connected in the correct sequence.
OK or NG
OK >> GO TO 4.
NG >> Reconnect jumper cables properly.
4. CHECK BATTERY FOR BOOSTER
Check that the battery for the booster is a 12V battery.
OK or NG
OK >> GO TO 5.
NG >> Change the vehicle for booster.
5. PERFORM DTC CONFIRMATION PROCEDURE AGAIN
With CONSULT-II
1. Select “SELF DIAG RESULTS” mode with CONSULT-II.
2. Touch “ERASE”.
3. Perform EC-1665, "
DTC Confirmation Procedure" , again.
4. Is DTC P0563 displayed again?
Without CONSULT-II
1. Erase the Diagnostic Test Mode II (Self-diagnostic results) memory. Refer to EC-1479
.
2. Perform EC-1665, "
DTC Confirmation Procedure" , again.
3. Is DTC 0563 displayed again?
Yes or No
Yes >> GO TO 6.
No >> GO TO 7.
6. REPLACE ECM
1. Replace ECM.
2. Perform initialization of NATS system and registration of all NATS ignition key IDs. Refer to BL-109, "
ECM
Re-Communicating Function" .
3. Perform Fuel Pump Learning Value Clearing. Refer to EC-1473, "
Fuel Pump Learning Value Clearing" .
4. Perform Injector Adjustment Value Registration. Refer to EC-1474, "
Injector Adjustment Value Registra-
tion" .
>> INSPECTION END
SEF439Z
Loading ...
Loading ...
Loading ...