Loading ...
Loading ...
Loading ...
EC-1742
[YD (WITHOUT EURO-OBD)]
DTC P2135 APP SENSOR
Specification data are reference values and are measured between each terminal and ground.
CAUTION:
Do not use ECM ground terminals when measuring input/output voltage. Doing so may result in dam-
age to the ECM's transistor. Use a ground other than ECM terminals, such as the ground.
TERMI-
NAL
NO.
WIRE
COLOR
ITEM CONDITION
DATA
(DC Voltage and Pulse Signal)
67 —
Sensor ground
(Sensors shield circuit)
[Engine is running]
● Warm-up condition
● Idle speed
Approximately 0.3V
82 B
Sensor power supply
(Accelerator pedal posi-
tion sensor 1 / Crankshaft
position sensor)
[Ignition switch ON] Approximately 5.3V
83 W
Accelerator pedal position
sensor 1
[Ignition switch ON]
● Engine stopped
● Accelerator pedal: Fully released
0.8 - 1.3V
[Ignition switch ON]
● Engine stopped
● Accelerator pedal: Fully depressed
4.2 - 5.0V
84 R
Accelerator pedal position
sensor 1 ground
[Engine is running]
● Warm-up condition
● Idle speed
Approximately 0.3V
90 L
Accelerator pedal position
sensor 2 power supply
[Ignition switch ON] Approximately 5.3V
91 G
Accelerator pedal position
sensor 2
[Ignition switch ON]
● Engine stopped
● Accelerator pedal: Fully released
0.45 - 0.9V
[Ignition switch ON]
● Engine stopped
● Accelerator pedal: Fully depressed
2.25 - 2.7V
92 Y
Accelerator pedal position
sensor 2 ground
[Engine is running]
● Warm-up condition
● Idle speed
Approximately 0.3V
Loading ...
Loading ...
Loading ...