Loading ...
Loading ...
Loading ...
EC-1150
[YD (WITH EURO-OBD)]
DTC P0192, P0193 FRP SENSOR
6. CHECK INTERMITTENT INCIDENT
Refer to EC-1058, "
TROUBLE DIAGNOSIS FOR INTERMITTENT INCIDENT" .
>> INSPECTION END
Component Inspection BBS001Z7
FUEL RAIL PRESSURE SENSOR
1. Reconnect harness connector disconnected.
2. Start engine and warm it up to normal operating temperature.
3. Check voltage between ECM terminals 48, 49 (Fuel rail pres-
sure sensor signal) and ground under the following conditions.
4. If the voltage is out of specification, disconnect fuel rail pressure
sensor harness connector and connect it again. Then repeat
above check.
5. If NG, replace fuel rail.
Removal and Installation BBS001Z8
FUEL RAIL
Refer to EM-171, "INJECTION TUBE AND FUEL INJECTOR" .
Condition Voltage V
Idle 1.7 - 2.0
2,000 rpm 2.0 - 2.3
MBIB0613E
Loading ...
Loading ...
Loading ...