Loading ...
Loading ...
Loading ...
EC-1648
[YD (WITHOUT EURO-OBD)]
DTC P0341 CMP SENSOR
Component Inspection BBS002BT
CAMSHAFT POSITION SENSOR
1. Loosen the fixing bolt of the sensor.
2. Disconnect camshaft position sensor harness connector.
3. Remove the sensor.
4. Visually check the sensor for chipping.
5. Check resistance as shown in the figure.
6. If NG, replace camshaft position sensor.
Removal and Installation BBS002BU
CAMSHAFT POSITION SENSOR
Refer to EM-167, "VACUUM PUMP" .
MBIB0647E
Terminal No. (Polarity) Resistance Ω [at 25°C (77°F)]
1 (+) - 2 (-)
Except 0 or ∞3 (+) - 1 (-)
3 (+) - 2 (-)
MBIB1009E
Loading ...
Loading ...
Loading ...