Loading ...
Loading ...
Loading ...
DTC P0580, P0581 ASCD STEERING SWITCH
EC-1293
[YD (WITH EURO-OBD)]
C
D
E
F
G
H
I
J
K
L
M
A
EC
2. CHECK ASCD STEERING SWITCH CIRCUIT
With CONSULT-II
1. Turn ignition switch ON.
2. Select “MAIN SW”, “RESUME/ACC SW”, “SET SW” and “CANCEL SW” in “DATA MONITOR” mode with
CONSULT-II.
3. Check each item indication under the following conditions.
Without CONSULT-II
1. Turn ignition switch ON.
2. Check voltage between ECM terminal 102 and ground under the
following conditions.
OK or NG
OK >> GO TO 8.
NG >> GO TO 3.
3. CHECK ASCD STEERING SWITCH GROUND CIRCUIT FOR OPEN AND SHORT
1. Turn ignition switch OFF.
2. Disconnect ASCD steering switch (1) harness connector.
3. Disconnect ECM harness connector.
4. Check harness continuity between ASCD steering switch termi-
nal 2 and ECM terminal 103. Refer to Wiring Diagram.
5. Also check harness for short to ground and short to power.
OK or NG
OK >> GO TO 5.
NG >> GO TO 4.
Switch Monitor item Condition Indication
MAIN switch MAIN SW
Pressed ON
Released OFF
CANCEL switch CANCEL SW
Pressed ON
Released OFF
RESUME/ACCEL-
ERATE switch
RESUME/ACC SW
Pressed ON
Released OFF
SET/COAST switch SET SW
Pressed ON
Released OFF
SEC006D
Switch Condition Voltage (V)
MAIN switch
Pressed Approx. 0.3
Released Approx. 4.3
CANCEL switch
Pressed Approx. 1.3
Released Approx. 4.3
RESUME/ACCELERATE
switch
Pressed Approx. 3.3
Released Approx. 4.3
SET/COAST switch
Pressed Approx. 2.3
Released Approx. 4.3
MBIB0043E
Continuity should exist.
PBIB2879E
Loading ...
Loading ...
Loading ...