Loading ...
Loading ...
Loading ...
EC-1288
[YD (WITH EURO-OBD)]
DTC P0580, P0581 ASCD STEERING SWITCH
On Board Diagnosis Logic BBS0022I
These self-diagnoses have the one trip detection logic.
MI will not light up for these diagnoses.
NOTE:
If DTC P0580 or P0581 is displayed with DTC P0606, first perform the trouble diagnosis for DTC P0605.
Refer to EC-1296, "
DTC P0605 ECM".
DTC Confirmation Procedure BBS0022J
NOTE:
If DTC Confirmation Procedure has been previously conducted, always turn ignition switch OFF and wait at
least 10 seconds before conducting the next test.
WITH CONSULT-II
1. Turn ignition switch ON.
2. Select “DATA MONITOR” mode with CONSULT-II.
3. Wait at least 10 seconds.
4. Press MAIN switch for at least 10 seconds, then release it and wait at least 10 seconds.
5. Press RESUME/ACCELERATE switch for at least 10 seconds, then release it and wait at least 10 sec-
onds.
6. Press SET COAST switch for at least 10 seconds, then release it and wait at least 10 seconds.
7. Press CANCEL switch for at least 10 seconds, then release it and wait at least 10 seconds.
8. If DTC is detected, go to EC-1292, "
Diagnostic Procedure" .
WITH GST
Follow the procedure “WITH CONSULT-II” above.
DTC No.
Trouble Diagnosis
Name
DTC Detecting Condition Possible Cause
P0580
0580
ASCD steering switch
circuit low input
● ECM detects that the ASCD steering switch is
stuck ON.
● Harness or connectors
(The switch circuit is open or shorted.)
● ASCD steering switch
● ECM
P0581
0581
ASCD steering switch
circuit high input
● An excessively high voltage signal from the
ASCD steering switch is sent to ECM.
Loading ...
Loading ...
Loading ...