Loading ...
Loading ...
Loading ...
EC-1322
[YD (WITH EURO-OBD)]
DTC P1211 TCS CONTROL UNIT
DTC P1211 TCS CONTROL UNIT PFP:47850
Description BBS0023G
The malfunction information related to TCS is transferred through the CAN communication line from ESP/
TCS/ABS control unit to ECM.
NOTE:
Be sure to erase the malfunction information such as DTC not only for ESP/TCS/ABS control unit but
also for ECM after TCS related repair.
On Board Diagnosis Logic BBS0023H
This self-diagnosis has the one trip detection logic.
MI will not light up for this self-diagnosis.
DTC Confirmation Procedure BBS0023I
NOTE:
If DTC Confirmation Procedure has been previously conducted, always turn ignition switch OFF and wait at
least 10 seconds before conducting the next test.
WITH CONSULT-II
1. Turn ignition switch ON.
2. Select “DATA MONITOR” mode with CONSULT-II.
3. Wait at least 5 seconds.
4. If DTC is detected, go to EC-1322, "
Diagnostic Procedure" .
WITH GST
Follow the procedure “WITH CONSLT-II” above.
Diagnostic Procedure BBS0023J
Go to BRC-52, "TROUBLE DIAGNOSIS" (models with ESP) or BRC-9, "TROUBLE DIAGNOSIS" (model
without ESP).
DTC No. Trouble diagnosis name DTC detecting condition Possible cause
P1211
1211
TCS control unit
ECM receives a malfunction information from
ESP/TCS/ABS control unit.
● ESP/TCS/ABS control unit
● TCS related parts
SEF817Y
Loading ...
Loading ...
Loading ...