Loading ...
Loading ...
Loading ...
EC-724
[QR (WITHOUT EURO-OBD)]
DTC P1065 ECM POWER SUPPLY
4. PERFORM DTC CONFIRMATION PROCEDURE
With CONSULT-II
1. Turn ignition switch ON.
2. Select “SELF DIAG RESULTS” mode with CONSULT-II.
3. Touch “ERASE”.
4. Perform DTC Confirmation Procedure.
See EC-721, "
DTC Confirmation Procedure" .
5. Is the 1st trip DTC P1065 displayed again?
Without CONSULT-II
1. Turn ignition switch ON.
2. Erase the Diagnostic Test Mode II (Self-diagnostic results) memory. Refer to EC-569, "
HOW TO ERASE
EMISSION-RELATED DIAGNOSTIC INFORMATION" .
3. Perform DTC Confirmation Procedure.
See EC-721, "
DTC Confirmation Procedure" .
4. Is the 1st trip DTC P1065 displayed again?
Yes or No
Yes >> GO TO 5.
No >> INSPECTION END
5. REPLACE ECM
1. Replace ECM.
2. Perform initialization of NATS system and registration of all NATS ignition key IDs. Refer to BL-107,
"NATS (NISSAN ANTI-THEFT SYSTEM)" .
3. Perform EC-562, "
Accelerator Pedal Released Position Learning" .
4. Perform EC-563, "
Throttle Valve Closed Position Learning" .
5. Perform EC-563, "
Idle Air Volume Learning" .
>> INSPECTION END
Loading ...
Loading ...
Loading ...