Loading ...
Loading ...
Loading ...
DTC P0217 ENGINE OVER TEMPERATURE
EC-1595
[YD (WITHOUT EURO-OBD)]
C
D
E
F
G
H
I
J
K
L
M
A
EC
3. CHECK COOLING FAN MIDDLE SPEED OPERATION
With CONSULT-II
1. Touch “MID”on the CONSULT-II screen.
2. Make sure that cooling fans operate as described below.
– Cooling fan-1 operate at higher speed than low speed.
– Cooling fan-2 operate at low speed.
OK or NG
OK >> GO TO 4.
NG >> Check cooling fan high speed control circuit. (Go to EC-
1599, "PROCEDURE B" .)
4. CHECK COOLING FAN HIGH SPEED OPERATION
With CONSULT-II
1. Touch “HIGH”on the CONSULT-II screen.
2. Make sure that cooling fan-2 operate at higher speed than low
speed.
OK or NG
OK >> GO TO 8.
NG >> Check cooling fan high speed control circuit. (Go to EC-
1601, "PROCEDURE C" .)
5. CHECK COOLING FAN LOW SPEED OPERATION
Without CONSULT-II
1. Disconnect cooling fan relays-1 and -3.
2. Start engine and let it idle.
3. Set temperature dial at full cold position.
4. Turn air conditioner switch ON.
5. Turn blower fan switch ON.
6. Make sure that cooling fan-1 operate at low speed.
OK or NG
OK >> GO TO 6.
NG >> Check cooling fan low speed control circuit. (Go to EC-
1597, "PROCEDURE A" .)
PBIB1668E
SEF785Z
PBIB1935E
SEC163BA
Loading ...
Loading ...
Loading ...