Loading ...
Loading ...
Loading ...
Remote Control Commands
R&S
®
NGP800
165User Manual 5601.5610.02 ─ 04
Example:
LOG:STIM 2018,08,18,08,18,18
LOG:STIM? -> 2018,08,18,08,18,18
LOG:TRIGgered[:STATe ] <arg0>
Sets or queries the trigger conditions for logging.
Parameters:
<condition> OFF | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8
OFF
There is no DIO pin that has a mode set to logging.
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8
DIO pin/s are enabled with a mode set to logging.
When DIO pin is enabled with logging mode, logging of the
channel assigned to that pin will be enabled when the correct
voltage is applied to the DIO pin.
7.9 Status Reporting Commands
The status reporting system stores all information on the present operating state of the
instrument, and on errors which have occurred. This information is stored in the status
registers and in the error queue. The STATus:OPERation and
STATus:QUEStionable subsystems contains commands to control the status report-
ing structure of the instrument.
See
Chapter A.3.1, "Structure of a SCPI Status Register", on page 176.
7.9.1 STATus:OPERation Registers
The commands of the STATus:OPERation subsystem control the status reporting
structures of the STATus:OPERation register.
The suffix at <Channel> selects the instrument channel. the range is <1...2>.
STATus:OPERation:INSTrument:CONDition?....................................................................166
STATus:OPERation:INSTrument:ISUMmary<Channel>:CONDition?....................................166
STATus:OPERation:INSTrument:ENABle..........................................................................166
STATus:OPERation:INSTrument:ISUMmary<Channel>:ENABle..........................................166
STATus:OPERation:INSTrument[:EVENt]?........................................................................166
STATus:OPERation:INSTrument:ISUMmary<Channel>[:EVENt]?........................................166
STATus:OPERation:INSTrument:NTRansition................................................................... 167
STATus:OPERation:INSTrument:ISUMmary<Channel>:NTRansition................................... 167
STATus:OPERation:INSTrument:PTRansition................................................................... 167
STATus:OPERation:INSTrument:ISUMmary<Channel>:PTRansition................................... 167
Status Reporting Commands
Loading ...
Loading ...
Loading ...