Loading ...
Loading ...
Loading ...
Remote Control Commands
R&S
®
NGP800
133User Manual 5601.5610.02 ─ 04
[SOURce:]VOLTage:PROTection[:STATe]......................................................................... 133
[SOURce:]VOLTage:PROTection:CLEar........................................................................... 133
[SOURce:]VOLTage:PROTection:LEVel............................................................................ 133
[SOURce:]VOLTage:PROTection:TRIPped?......................................................................134
[SOURce:]VOLTage:PROTection[:STATe] <En/Disable volt protection>[, <Channel
list>]
[SOURce:]VOLTage:PROTection[:STATe]? [<Channel list>]
Sets or queries the OVP state of the previous selected channel.
Parameters:
<state> 0
OVP is deactivated
1
OVP is activated
Parameters for setting and query:
<Channel list> <list>
Example:
VOLT:PROT? (@1)
Queries OVP state at channel 1.
Example: See
Example "Configuring the overvoltage protection"
on page 132.
[SOURce:]VOLTage:PROTection:CLEar [<Channel list>]
[SOURce:]VOLTage:PROTection:CLEar [<Channel list>]
Resets the OVP state of the selected channel. If an OVP event has occurred before,
the reset also erases the message on the display.
Parameters:
<Channel list> <list>
Example:
VOLT:PROT:CLEAR (@1)
Resets OVP state at channel 1.
Example: See
Example "Configuring the overvoltage protection"
on page 132.
Usage: Setting only
[SOURce:]VOLTage:PROTection:LEVel [<New value for voltage protection>,
<Channel list>]
[SOURce:]VOLTage:PROTection:LEVel? [<Channel list>]
Sets or queries the overvoltage protection value of the selected channel.
Parameters:
<voltage> <numeric value> | MIN | MINimum | MAX | MAXimum | DEF |
DEFault
Configuration Commands
Loading ...
Loading ...
Loading ...