Loading ...
Loading ...
Loading ...
Remote Control Commands
R&S
®
NGP800
151User Manual 5601.5610.02 ─ 04
Usage: Event
ARBitrary:TRIGgered:GROup[:STATe] <>
Sets or queries the trigger condition of the arbitrary step group for the selected chan-
nel.
Parameters:
<condition> OFF | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8
OFF
There is no DIO pin that has a mode set to arbitrary step group
for the selected channel.
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8
DIO pin/s are enabled with a mode set to arbitrary step group for
the selected channel.
When DIO pin is enabled with arbitrary step point mode, Quick-
Arb function will step to the next point when the correct voltage
is applied to the DIO pin.
ARBitrary:TRIGgered:POINt[:STATe] <>
Sets or queries the trigger condition of the arbitrary step point for the selected channel.
Parameters:
<condition> OFF | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8
OFF
There is no DIO pin that has a mode set to arbitrary step point
for the selected channel.
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8
DIO pin/s are enabled with a mode set to arbitrary step point for
the selected channel.
When DIO pin is enabled with arbitrary step point mode, Quick-
Arb function will step to the next point when the correct voltage
is applied to the DIO pin.
ARBitrary:TRIGgered[:STATe] <>
Sets or queries the trigger condition of the arbitrary for the selected channel.
Parameters:
<condition> OFF | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8
OFF
There is no DIO pin that has a mode set to arbitrary for the
selected channel.
Advanced Operating Commands
Loading ...
Loading ...
Loading ...