Loading ...
Loading ...
Loading ...
Remote Control Commands
R&S
®
NGP800
99User Manual 5601.5610.02 ─ 04
*RCL <Number>
Recall
Loads the instrument settings from an internal memory identified by the specified num-
ber. The instrument settings can be stored to this memory using the command
*SAV
with the associated number.
7.2 System Settings Commands
The SYSTem subsystem contains the commands for general functions, which do not
affect signal generation directly.
SYSTem:BEEPer:CURRent:STATe.................................................................................... 99
SYSTem:BEEPer:PROTection:STATe...............................................................................100
SYSTem:BEEPer:PROTection[:IMMediate]....................................................................... 100
SYSTem:BEEPer:WARNing:STATe.................................................................................. 100
SYSTem:BEEPer:WARNing[:IMMediate].......................................................................... 100
SYSTem:COMMunicate:SOCKet:APPLy...........................................................................100
SYSTem:COMMunicate:SOCKet:DHCP........................................................................... 101
SYSTem:COMMunicate:SOCKet:DISCard........................................................................ 101
SYSTem:COMMunicate:SOCKet:GATeway.......................................................................101
SYSTem:COMMunicate:SOCKet:IPADdress..................................................................... 101
SYSTem:COMMunicate:SOCKet:MASK........................................................................... 101
SYSTem:COMMunicate:SOCKet:RESet........................................................................... 102
SYSTem:COMMunicate:WLAN:CONNection[:STATe].........................................................102
SYSTem:COMMunicate:WLAN:IPADdress........................................................................102
SYSTem:COMMunicate:WLAN:PASSword....................................................................... 102
SYSTem:COMMunicate:WLAN:SSID............................................................................... 102
SYSTem:COMMunicate:WLAN[:STATe]............................................................................103
SYSTem:DATE.............................................................................................................. 103
SYSTem:KEY:BRIGhtness.............................................................................................. 103
SYSTem:INTerface?....................................................................................................... 103
SYSTem:INTerface:GPIB?.............................................................................................. 104
SYSTem:LOCal..............................................................................................................104
SYSTem:REMote........................................................................................................... 104
SYSTem:RWLock...........................................................................................................104
SYSTem:TIME............................................................................................................... 104
SYSTem:TOUCh[:STATe]................................................................................................104
SYSTem:UPTime?......................................................................................................... 105
SYSTem:BEEPer:CURRent:STATe <arg0>
Sets "current control" beeper tone.
Parameters:
<mode> 1
Control beeper is activated.
System Settings Commands
Loading ...
Loading ...
Loading ...