Loading ...
Loading ...
Loading ...
En
50
Category name Parameter name
FX1
2 BAND EQ B1 Q
2 BAND EQ B1 FREQUENCY
2 BAND EQ B1 GAIN
2 BAND EQ B2 Q
2 BAND EQ B2 FREQUENCY
2 BAND EQ B2 GAIN
CHORUS RATE
CHORUS WIDTH
CHORUS PHASE
CHORUS DELAY
CHORUS MIX RATIO
COMPRESSOR RATIO
COMPRESSOR ATTACK
COMPRESSOR RELEASE
COMPRESSOR THRESHOLD
COMPRESSOR GAIN
COMPRESSOR MIX RATIO
DELAY TIME
DELAY FEEDBACK
DELAY HI CUT
DELAY MIX RATIO
DISTORTION DRIVE
DISTORTION LO FREQ
DISTORTION HI FREQ
DISTORTION DYNAMICS
DISTORTION TONE
DISTORTION MIX RATIO
DUCKER ATTACK
DUCKER ATTACK CURVE
DUCKER RELEASE
DUCKER RELEASE CURVE
DUCKER DEPTH
FLANGER RATE
FLANGER WIDTH
FLANGER PHASE
FLANGER DELAY
FLANGER FEEDBACK
FLANGER MIX RATIO
LO-FI PREAMP
LO-FI REDUCTION
LO-FI BIT DEPTH
LO-FI CUTOFF
LO-FI RESONANCE
LO-FI MIX RATIO
MULTI MODE FILTER CUTOFF
MULTI MODE FILTER GAIN
MULTI MODE FILTER RESONANCE
MULTI MODE FILTER GLIDE
MULTI MODE FILTER MIX RATIO
PHASER RATE
PHASER WIDTH
PHASER PHASE
PHASER FREQUENCY
PHASER FEEDBACK
PHASER MIX RATIO
MIDI NOTE
VELOCITY
LENGTH
Category name Parameter name
MIDI CC1
PARAMETER 1 PITCH BEND
PARAMETER 2 AFTER TOUCH
PARAMETER 3
PARAMETER 4
PARAMETER 5
PARAMETER 6
MIDI CC2
PARAMETER 1
PARAMETER 2
PARAMETER 3
PARAMETER 4
PARAMETER 5
PARAMETER 6
MIXER
VOLUME
PAN
LFO
SPEED
DEPTH
SEQUENCE
RETRIGGER CNT
RETRIGGER SPD
! Even if a target parameter is selected, the LFO effect will not be applied if an
effect, MIDI track, etc. including that parameter is not assigned.
Auto standby function
When the auto standby function is turned on, the power is automatically
set to standby mode after four hours have passed with all of the follow-
ing conditions met.
— None of this unit’s buttons or controls are operated.
— The track level indicators are not lit.
— The playback function is not operating.
— No PRO DJ LINK connections are made.
— A USB device is not connected to the USB device insertion slot (Type
A terminal) on the top panel of the unit.
! The indicator of the [HOME/UTILITY/WAKE UP] button is lit during
auto standby.
!
When the [HOME/UTILITY/WAKE UP] button is pressed, the
standby status is canceled.
!
This unit is shipped with the auto standby function turned on. If you
do not want to use the auto standby function, set [AUTO STANDBY]
to [OFF].
Loading ...
Loading ...
Loading ...