Loading ...
Loading ...
Loading ...
En
31
Adjusting track parameters (TRACK MENU)
PREVIEW (SETTING)
Automatically begins a preview when a sample is selected during brows-
ing. This can be switched ON/OFF by tapping.
When set to ON:
When the rotary selector is turned to move the focus, a selected sample
is played only once.
When set to OFF:
Even if the rotary selector is turned to move the focus, samples are not
played.
!
The default is ON.
! If a sample is selected when this is switched from OFF to ON, it is
played only once.
If you press and hold [PREVIEW], you can set various preview settings
for browsing.
Option settings Options
PREVIEW MONITOR
Master + Headphones,Headphones
PREVIEW VOLUME
0-127
!
PREVIEW MONITOR: Sound output destination for sample preview
!
PREVIEW VOLUME: Sound volume for sample preview
ASSIGNED SAMPLE
Tapping this jumps to the location of the sample assigned to the cor-
responding track.
!
This is not displayed when [SEARCH] is ON.
UNLOAD
Unloads the sample that is loaded to the track.
! This is not displayed when [SEARCH] is ON.
% Tap [UNLOAD].
The sample is unloaded. When it is unloaded, the sample name dis-
played at the upper right of the browse screen disappears.
DELETE
Deletes a sample.
! This is not displayed when [SEARCH] is ON.
1 Turn the rotary selector to select the sample you wish
to delete.
2 Tap [DELETE].
A confirmation pop-up screen appears.
3 Press [OK].
Recording an external input sound and editing a sample (SAMPLING/EDIT)
You can record an external input sound or a sound output from the unit and edit the waveform of a sample.
1 2 3 4 5
6
7
8
9
1 SOURCE
Selects the target for sampling.
The target can be selected from [LINE IN] and [RSMPL].
!
This cannot be operated while recording.
2 REC THRESHOLD
Sets the volume of an input signal for which recording starts
automatically.
!
This cannot be operated while recording.
! When this is OFF, recording starts instantly.
! When PLAY, recording starts at the same time as when the
sequencer is started with the [PLAY] button.
3 REC LENGTH
Sets the length of time (on a BAR level) to continue recording
from the start of recording. This is dependent on the BPM of the
sequencer. When the specified length is reached, recording stops
automatically.
!
This cannot be operated while recording.
! If this is OFF, recording stops automatically when 32 seconds are
exceeded after the start of recording.
4 SELECTION START
Sets the start point of the selection range.
!
This cannot be operated while recording.
5 SELECTION END
Sets the end point of the selection range.
!
This cannot be operated while recording.
6 REC
Enters standby mode for input recording.
Tapping this starts standby, and recording starts if the input signal
exceeds [REC THRESHOLD].
! When [REC THRESHOLD] is OFF, the status switches to record-
ing (lit) the moment this button is tapped.
Not standby (off) Standing by (flashing) Recording (lit)
If recording is performed in the state in which a sample is already
assigned, the waveform is overwritten.
7 SOFT LIMITER
A limiter can be applied to the input sound.
Loading ...
Loading ...
Loading ...