Loading ...
Loading ...
Loading ...
En
46
TORAIZ AS-1 tracks
These are dedicated track attributes that are convenient for perfor-
mances with a TORAIZ AS-1 analog synthesizer connected to [MIDI
OUT].
1
2
1 BANK SELECT
Changes the bank value stored in the preset.
2 PROG CHANGE
Changes the program change value to transmit.
Connections
1 Connect the MIDI IN terminal of the TORAIZ AS-1 and
the MIDI OUT/THRU terminal of this unit with a MIDI
cable.
2 Tap [SYNC] in the HOME screen, etc. to display the
SYNC screen.
3 Tap [DIN MIDI] in MIDI I/F SELECT.
4 Set MIDI Channel to ALL or any channel, MIDI
Param Rcv to CC, and MIDI Control Enable to On in
[GLOBAL SETTING] of the TORAIZ AS-1 unit.
After configuring the above settings, tap [TRACK TYPE] in the TRACK
MENU screen of the track you wish to use for the MIDI performance and
then use the rotary selector to select [TORAIZ AS-1].
Setting MIDI NOTE (MIDI NOTE)
[MIDI NOTE] can be set in the same way as with a MIDI track. However,
[NOTE2], [NOTE3], and [NOTE4] cannot be set because the TORAIZ
AS-1 does not support chords.
Setting MIDI CC (MIDI CC1/CC2)
If you tap [CC1] or [CC2], the unit switches to the screen for setting the
MIDI CC compatible parameters of the TORAIZ AS-1.
1
2
3
1 CC number selection
Changes the control change numbers of [PARAMETER 1] to
[PARAMETER 6].
! [PITCH BEND] of [PARAMETER 1] and [AFTER TOUCH] of
[PARAMETER 2] cannot be changed in the CC1 setting screen.
2 ACTIVE
Switches [PARAMETER 1] to [PARAMETER 6] between active and
non-active.
3 CC values
Changes the control change values of [PARAMETER 1] to
[PARAMETER 6].
Switching the preset
Bank selection and program change can be used to select the program
of the AS-1.
1 Tap [BANK SELECT].
! When using program change, tap [PROG CHANGE].
2 Turn the rotary selector to select the bank containing
the preset you wish to call out and then press the rotary
selector.
The bank is entered. Select a bank from the following.
! [U1] to [U5]: User banks
! [F1] to [F5]: User banks
! When using program change, use the rotary selector to select the
program you wish to call out and then press the rotary selector to
enter the program.
!
The bank selection and program change values can be set for each
scene.
Setting parameters for scale
performances (SET SCALE)
Refer to Setting parameters for scale performances (SET SCALE) on
page 45 .
Loading ...
Loading ...
Loading ...