Loading ...
Loading ...
Loading ...
En
12
Using the performance pads
Playing a sample sound
1 Set all of the [MUTE] button, [HOT SLICE] button,
[SLICE] button, and [SCALE] button to OFF.
All of the buttons are set to the off state.
2 Tap the performance pads.
The sample assigned to each performance pad plays.
Recording a performance (dynamic
recording)
1 Press the [REC] button.
The [REC] button lights up in red and the unit enters the recording state.
2 Press the [PLAY/PAUSE f] button.
The [PLAY/PAUSEf] button lights up in green and the sequence
plays while the unit is in the recording state.
3 Tap the performance pads to set triggers.
A trigger is set when the pad is tapped. The step key to which the trigger
was input lights or flashes in the track color.
Using the operation modes of the
performance pads
Four operation modes are available.
Muting a track (MUTE mode)
Tracks assigned to performance pads can be muted by pressing the
[MUTE] button.
1 Press the [MUTE] button.
The [MUTE] button lights up in white.
2 Press the performance pad to mute the assigned
track.
The performance pad whose track is muted turns off.
!
You can mute multiple tracks at the same time.
! To cancel mute, press the performance pad corresponding to the
muted track again.
!
If a performance pad is pressed while pressing the [SHIFT] button in
the mute mode, the sound plays only for the track corresponding to
the performance pad. (SOLO mode)
—
Solo can be set for multiple tracks at the same time.
— To cancel solo, press the performance pad for which the sound is
playing again while pressing the [SHIFT] button.
—
When all solo states are canceled, the previous mute state is
restored.
! Pressing the [MUTE] button while pressing the [SHIFT] button can-
cels all mute states and solo states.
3 Press the [MUTE] button again.
The [MUTE] button turns off and the MUTE mode ends.
!
Mute can also be set by pressing a performance pad while pressing
the [MUTE] button. In that case, the MUTE mode ends once you
release the [MUTE] button.
Playing a hot slice performance (HOT SLICE
mode)
Sliced sample sounds assigned to performance pads can be played
from the sliced sample position to the end of the sample by pressing the
[HOT SLICE] button.
1 Select the track for which you wish to play a hot slice
performance of the sample assigned to it.
2 Press the [HOT SLICE] button.
The [HOT SLICE] button lights in white.
! The sample is sliced equally into 16 and the slices are assigned to
the performance pads in order.
! Press and hold down the [HOT SLICE] button to display the
SET SLICE screen and enter the HOT SLICE mode.
3 Tap the performance pads.
The sample assigned to each performance pad plays.
4 Press the [HOT SLICE] button again.
The [HOT SLICE] button turns off and the HOT SLICE mode ends.
Playing a slice performance (SLICE mode)
Sliced sample sounds assigned to performance pads can be played by
pressing the [SLICE] button.
1 Select a track to play a slice performance of the
sample assigned to it.
2 Press the [SLICE] button.
The [SLICE] button lights up in white.
! The sample is sliced equally into 16 and the slices are assigned to
the performance pads in order.
! Press and hold down the [SLICE] button to display the SET SLICE
screen and enter the SLICE mode.
3 Tap the performance pads.
The sample assigned to each performance pad plays.
4 Press the [SLICE] button again.
The [SLICE] button turns off and the unit exits slice performance mode..
Playing a scale performance (SCALE mode)
Samples of scales assigned to performance pads can be played by
pressing the [SCALE] button.
1 Select a track to play a scale performance of the
sample assigned to it.
2 Press the [SCALE] button.
The [SCALE] button lights up in white.
! A sample can be played using the scale set on the SET SCALE
screen, treating the bottom left performance pad as the root key.
! Press and hold down the [SCALE] button to display the SET SCALE
screen and enter the SCALE mode.
3 Tap the performance pads.
Samples are played in the scale assigned to each performance pad.
4 Press the [SCALE] button again.
The [SCALE] button turns off and the SCALE mode ends.
! Trigger step input is possible using one of the following two methods
for a HOT SLICE mode performance, SLICE mode performance, and
SCALE mode performance.
— Tap the pad you wish to play and then press the 16-step key of the
step you wish to input.
— While pressing the 16-step key of the step you wish to input, tap
the pad you wish to input for that step.
Loading ...
Loading ...
Loading ...