Loading ...
Loading ...
Loading ...
Fuses and bulbs
–
Unl
ock the securing t
abs fr
om the bulb
hol
der
›
››
Fig. 64
1
or turn the bulb holder
t
o the l
eft
2
and
3
.
–
Remove the bulb holder from its location.
–
Lightly press the defective bulb into the
bulb hol
der
, then t
urn it t
o the l
eft and re-
move it.
–
Fit the new bulb, pressing it into the bulb
holder and turn it to the right as far as it will
go.
–
Use a cloth to remove any fingerprints from
the glass part of the bulb.
–
Check that the new bulb works properly.
–
Carry out the same actions in reverse order
for assembly and pay special attention to
placing the bulb holder, ensuring that the
tabs are properly secured.
Note
For LED pilots, you can only change the re-
verse bulb.
Changing the number plate bulbs
Fig. 65
In the rear bumper: Number plate light.
Fig. 66
number plate light: remove the bulb
hol
der
.
Follow the steps indicated:
–
Press the number plate light in the direction
of the arr
o
w
›
›
›
Fig. 65.
–
Detach the number plate light.
–
Turn the connector lock
›››
Fig. 66 in the di-
rection of arrow
1
and pull on the connec-
t
or
.
–
R
ot
at
e the bulb holder in the direction of
the arrow
›››
Fig. 66
2
and extract it to-
gether with the bulb
.
–
R
epl
ace the f
ault
y bulb with a new identical
bulb.
–
Insert the bulb holder into the number plate
light and rotate all the way in the opposite
direction to the arrow
›››
Fig. 66
2
.
–
Plug the connector into the bulb holder.
–
Insert the number plate light carefully into
the opening on the bumper
. Ensur
e that the
number pl
at
e light is in the corr
ect position.
–
Insert the number plate light into the bump-
er until it audibly clicks into place.
63
Loading ...
Loading ...
Loading ...