Loading ...
Loading ...
Loading ...
Lights
Setting 2
All seats occupied, luggage compart-
ment full. With trailer and minimum
drawbar l
oad.
Setting 3
Driver only, luggage compartment full
Driving with trailer and maximum
drawbar load.
Dynamic headlight range control
The control is not mounted in vehicles with
dynamic headlight r
ange control. The head-
light range is automatically adjusted accord-
ing to the vehicle load status when they are
switched on.
WARNING
Heavy objects in the vehicle may mean
that the headlights dazzle and distract oth-
er drivers. This could r
esult in a serious ac-
cident.
●
Adjust the light beam to the vehicle load
status so that it does not blind other driv-
ers.
Driving abroad
The light beam of the dipped beam lights is
asymmetric: the side of the r
oad on which
you ar
e driving is lit mor
e int
ensely.
When a car that is manuf
actured in a country
that drives on the right travels to a country
that drives on the left (or vice versa), it is nor-
mally necessary to cover part of the head-
light bulbs with stickers or to change the ad-
justment of the headlights to avoid dazzling
other drivers.
In such cases, the regulations specify certain
light values that must be complied with for
designated points of the light distribution. This
is known as “Tourist light”.
The light distribution of the halogen and full-
LED headlights allows the specific “tourist
light” values to be met without the need for
stickers or changes in the settings.
Note
“Tourist light” is only allowed temporarily. If
you are planning a long stay in a country
that driv
es on the other side, you should
take the vehicle to an Authorised Technical
Service to change the headlights.
Interior lights
Lighting of the instrument panel
,
displ
ays and s
wit
ches
Depending on the model, the lighting of the
instrument panel and s
wit
ched can be adjus-
t
ed in the Easy Connect syst
em, using the
butt
on > SETTINGS
›››
page 89.
With the ignition on and without light activa-
tion, the analogue instrument panel lighting
remains activated in daytime light conditions.
The lighting is reduced as the exterior light di-
minishes. In some cases, e.g. when driving
through a tunnel without the function ac-
tive, the instrument panel lighting may even
switch off. The objective of this function is to
provide the driver with a visual indication that
he or she should activate the dipped beam.
If your vehicle is equipped with a digital in-
strument panel (Digital SEAT Cockpit), the
following message will appear Turn on the
lights on the instrument panel.
Interior and reading lights
Fig. 117
Detail of roof lining: front lighting of
the passenger compartment.
»
125
Loading ...
Loading ...
Loading ...