User Manual - Page 348

For ATECA 2019.

Loading ...
Loading ...
Loading ...
Practical tips
Petrol engines: st
andar
d VW 504 00,
VW 502 00, VW 508 00, ACEA C3 or
API SN.
Diesel engines:
st
andar
d VW 507 00,
VW 505 01, ACEA C3 or API CK-4.
Have the oil changed by a specialised work-
shop.
Using engine oil that is compliant with the VW
504 00 standard instead of VW 508 00
could increase consumption and the vehicles
CO
2
emissions.
Recommended by SEAT
SEAT recommends using original SEAT oil to
guarantee high SEAT engine performance.
Vehicles with diesel particulate filter*
Only VW 507 00 engine oil, with reduced ash
formation, may be used in diesel engines
equipped with particulate filter. Using other
types of oil will cause a higher soot concen-
tration and reduce the life of the DPF. There-
fore:
Avoid mixing this oil with other engine oils.
Only in exceptional circumstances, if the
engine oil level is too low
››
page 347 and
you cannot obtain the oil specified for your
vehicle, you can use a small quantity of oil
(once) conforming to the specifications
VW 506 00, VW 506 01, VW 505 00,
VW 505 01 or ACEA B3/ACEA B4 (up to 0.5 l)
››
page 345.
Engine oil additives
No type of additive should be mixed with the
engine oil. The deterioration caused by these
additives is not covered by the warranty.
Note
Before a long trip, we recommend finding
an engine oil that conforms to the corre-
sponding VW specifications and recom-
mend k
eeping it in the vehicle. This way, the
correct engine oil will always be available
for a top-up if needed.
Engine oil specifications
Diesel engines
Engine type
Type of
Service
Specifica-
tion
With particulate
filter (DPF)
a)
Set Service
and Flexible
Service Inter-
vals
VW 507 00
Without particu-
late filter (DPF)
Set Service
Interv
als
VW 505 01
b)
VW 506 01
b)
a)
Only use recommended oils, otherwise you may
damage the engine
.
b)
If the qualit
y of the fuel av
ail
abl
e in the country
does not fulfil the EN 590 (for diesel) standard.
Warning lamp
It lights up red
Do not carry on driving!
Engine oil pressure too lo
w.
Switch off the engine. Check the engine oil level.
If this warning lamp starts to flash, and is accom-
panied by three
audible warnings, switch off the en-
gine and check the oil level. If necessary, add more
oil
››
page 347.
If the warning lamp flashes although the oil level
is corr
ect, stop driving. Do not even run the engine at
idle speed! Obtain technical assistance.
346
Loading ...
Loading ...
Loading ...