User Manual - Page 270

For ATECA 2019.

Loading ...
Loading ...
Loading ...
Driving
CCS temporarily switched off. The set
speed is displ
ayed in small or dark
ened
figur
es.
Syst
em err
or. Contact a specialised
workshop.
CCS switched on. The speed memory is
empty.
The CCS is switched on. The set speed is
displayed in large figures.
Changing gear in CCS mode
The CCS decelerates as soon as the clutch
pedal is pressed, intervening again automati-
cally after a gear is engaged.
Travelling down hills with the CCS
If the CCS cannot maintain a constant vehi-
cle speed downhill, brake and change down
a gear if necessary. The GRA is temporarily
disabled by pressing the brake.
Automatic off
The GRA disconnects automatically or is
temporarily interrupted:
If the system detects a fault that could af-
fect the working order of the CCS.
If you press and maintain the accelerator
pedal for a certain time, driving faster than
the stored speed.
If the dynamic driving control systems inter-
vene, ASR, ESC, etc.
A
B
C
D
If the br
ak
e pedal is pr
essed.
If the airbag is trigger
ed.
If the l
ever is taken out of the D/S position.
WARNING
Use of GRA could cause accidents and se-
vere injuries if it is not possible to driv
e at a
constant speed maintaining the safety dis-
tance.
Do not use GRA in heavy traffic, if the dis-
tance from the vehicle in front is insuffi-
cient, on steep roads, with several bends or
in slippery circumstances or on flooded
roads.
Never use the CCS when driving off-road
or on unpaved roads.
Adapt your speed and the distance to the
vehicles ahead in line with visibility, weath-
er, the condition of the road and the traffic
situation.
To avoid unexpected operation of the
cruise control system, turn it off every time
you finish using it.
It is dangerous to use a set speed which is
too high for other conditions.
If driving down a steep gradient, the GRA
cannot maintain a constant speed. The
speed can increase. In this case, brake and
change down a gear.
Operating the cruise control
Fig. 252
On the turn signal lever: controls for
oper
ating the GRA.
Connecting
Move the control
Fig. 252
1
to .
If no speed has been pr
ogr
ammed, the sys-
t
em will not contr
ol it.
Activ
ating the cruise control
Press button
››
Fig. 252
2
in area 
.
The curr
ent speed is st
or
ed and the cruise
contr
ol is activated.
Temporarily interrupting
Move the control
››
Fig. 252
1
to

or
st
ep on the br
ak
e.
The cruise control system is switched off tem-
porarily. The speed is stored.
268
Loading ...
Loading ...
Loading ...