User Manual - Page 280

For ATECA 2019.

Loading ...
Loading ...
Loading ...
Driving
WARNING
Observe the safety warnings
››
in Con-
trol and warning lamps on page 88.
Status display
Fig. 262
On the instrument panel display:
ACC inactiv
e (St
andby).
ACC activ
e
.
Indications on the display
Fig. 262
:
V
ehicle ahead detected. ACC is not ac-
tive and is not regulating your speed.
1
Distance from the vehicle ahead. ACC is
not activ
e and is not r
egul
ating your dis-
t
ance
.
Vehicle ahead detected. ACC is active
and is regulating your speed.
Distance level 2 set by the driver.
ACC is active and is regulating your dis-
tance based on speed.
Speed programmed with the ACC
Note
When the ACC is connected, the indica-
tions on the instrument panel screen may
be concealed by warnings from other func-
tions, such as an incoming call.
Radar sensors
Fig. 263 On the front behind the SEAT badge:
r
adar sensors.
2
3
4
5
6
A radar sensor is fitted on the front, behind
the SEAT badge
Fig. 263
.
The r
adar sensor's visibility may be impaired
by dirt, or by environmental influences such
as rain or mist. In this case the adaptive cruise
control (ACC) does not work. The instrument
panel displays the following message: ACC:
No sensor vision! Clean the SEAT badge
area
››
.
When the r
adar sensor begins t
o oper
at
e
pr
operly, the ACC will become available. The
message on the screen will switch off and the
ACC may be reactivated.
ACC operation may be affected by a strong
radar reverse reflection. This may occur, for
example, in a closed car park or due to the
presence of metallic objects (e.g. guard rails
or sheets used in road works).
The area in front of and around the radar
sensor should not be covered with adhesives,
additional or similar headlights, as this may
negatively affect ACC operation.
If the front of the vehicle is not properly re-
paired or structural modifications are made
to it, ACC operation may be affected. In this
scenario, SEAT recommends visiting a SEAT
dealership.
CAUTION
If you have the sensation that the radar
sensor is damaged or has lost its settings,
278
Loading ...
Loading ...
Loading ...