Loading ...
Loading ...
Loading ...
Help with parking and manoeuvring
Trailer mode
Fig. 292
Parking assist display on the screen
with tr
ail
er att
ached.
On vehicles with a factory-fitted trailer hitch,
when the tr
ail
er is connect
ed, the r
ear sen-
sors will not activ
ate when reverse gear is en-
gaged or button is pressed. Therefore, any
objects behind or to the side of the vehicle
will not be indicated on the screen and no
audio signals will sound.
The screen will only display objects detected
at the front, and the vehicle's trajectory will
be hidden.
Manoeuvre braking function*
3 Only valid with Parking System Plus
The emergency br
aking function is used to
minimise damage in the event of a collision.
Depending on the equipment, if the Parking
Aid is active, the braking while manoeuvring
function activ
ates emergency braking when it
detects an obstacle in the vehicle’s path that
could cause a collision, driving forwards or in
reverse.
The function will not brake if the Parking Aid is
activated automatically. For the system to
operate, manoeuvring speed must be be-
tween 2.5 and 10 km/h (between 1.5 and 6
mph) for the front area and between 1.5 and
10 km/h (between 1 and 6 mph) for the rear.
Following an intervention, the braking while
manoeuvring function will be inactive in the
same direction of travel for 5 metres. Once
the gear is changed, or the selector lever’s
position is changed, the function will be ac-
tive again. The Parking Aid’s limitations apply.
The manoeuvre braking function is set in the
Easy Connect system with button > SET-
TINGS > Parking and manoeuvring.
●
on – permits the use of the braking while
manoeuvring function.
●
off – does not permit the use of the
braking whil
e manoeuvring function.
Temporary suppression of emergency
braking
●
When the function is deactivated with the
Manoeuvre braking button that appears on
the Parking assist scr
een of the Easy Con-
nect system.
●
Whenever any of the car doors, rear lid or
bonnet are opened.
Rear parking aid*
Description
The rear parking aid is an audible and visual
assistant that warns of obstacl
es located be-
hind the vehicle.
There are sensors integrated in the rear
bumper. When they detect an obstacle, you
are alerted by audible warnings and visually
on the Easy Connect system.
If the Top View Camera* is installed, the rear
parking aid will issue an audible warning
about objects near the rear of the vehicle,
and the Top View Camera* image will be
available on the Easy Connect screen, giving
a real image of the objects around the car.
Make particularly sure that the sensors are
not covered by adhesives, residues, dirt and
the like, as this could affect the system's op-
eration. Cleaning instructions
›››
page 370.
The approximate measurement range of the
rear sensors is:
0.60 m
»
Side area:
315
Loading ...
Loading ...
Loading ...