Loading ...
Loading ...
Loading ...
Help with parking and manoeuvring
Familiarising yourself with the system
T
o f
amiliarise yourself with the syst
em, the
orient
ation lines and their function, SEAT r
ec-
ommends practising in a place without too
much traffic or in a car park when there are
good weather and visibility conditions.
Cleaning the camera lens
Keep the camera lens clean and clear of
snow and ice:
●
Moisten the lens using a normal alcohol-
based glass cleaning product and clean the
lens with a dry cloth.
●
Remove snow using a small brush.
●
Use de-icing spray to remove any ice.
CAUTION
●
Do not use abrasive cleaning products t
o
clean the camera lens.
●
Do not use hot or warm water to remove
ice or snow from the camera lens, as it
could be damaged.
Parking and manoeuvring with re-
v
erse assist
Fig. 299
Display on the Easy Connect system
scr
een: guide lines.
Meaning of the orientation lines
›
›
›
Fig. 299
L
at
eral lines: extension of the vehicle
(approximately in its total width) on the
road.
End of the side lines: approx. 2 m behind
the vehicle on the road.
Intermediate line: approx. 1 m behind the
vehicle on the road.
Horizontal red line: a safe distance of
approx. 40 cm at the rear of the vehicle
on the road.
1
2
3
4
Switching the system on and off
●
Reverse assist is connected by a contact
when engaging r
e
v
erse gear
.
●
The syst
em switches off 8 seconds after
disengaging reverse gear and immediately
after removing the contact.
●
The camera will stop transmitting images
above the speed of 15 km/h (9 mph) with re-
verse engaged.
In combination with the parking aid plus sys-
tem
›››
page 312, the camera image will no
longer be displayed when reverse gear is dis-
engaged, and the system will display the op-
tical information provided by the parking aid
system.
It is also possible to hide the reverse assist im-
age:
●
By pressing one of the Infotainment system
buttons on the display.
●
OR: by clicking on the miniature vehicle
shown on the screen.
If you wish to display the rear assist image
again:
●
Disengage and re-engage reverse gear.
●
OR: Press the RVC function button
1)
»
1)
The RVC button will only be displayed when re-
verse gear is engaged.
323
Loading ...
Loading ...
Loading ...