Loading ...
Loading ...
Loading ...
Fuses and bulbs
●
Switch off the lights and the parking light
before changing a bulb
.
●
Take good care to avoid damaging any
components.
For the sake of the environment
Please ask your specialist retailer how to
dispose of used bulbs in the pr
oper manner.
Note
●
Pl
ease check at r
egul
ar int
erv
als that all
lighting (especially the exterior lighting) on
your vehicle is functioning properly. This is
not only in the interest of your own safety,
but also that of all other road users.
●
Before changing a bulb, make sure you
have the correct new bulb.
●
Do not touch the glass part of the bulb
with your bare hands, use a cloth or paper
towel instead, since the fingerprints left on
the glass will vaporise as a result of the
heat generated by the bulb, they will be
deposited on the reflector and will impair
its surface.
●
Depending on the level of equipment fit-
ted in the vehicle, LEDs may be used for
part or all of the interior and/or exterior
lighting. LEDs have an estimated life that
exceeds than that of the car. If an LED light
fails, go to an authorised workshop for its
replacement.
Dipped beam headlight bulb
Fig. 55
In the engine compartment: remove
the co
v
er
.
Fig. 56
In the engine compartment: dipped
beam headlight bulb
.
–
Raise the bonnet.
–
Move the loops
›
›
›
Fig. 55
1
in the direc-
tion of the arr
o
w and r
emo
v
e the cover.
–
Remove connector
›››
Fig. 56
2
from the
bulb
.
–
Unclip the ret
ainer spring
›
›
›
Fig. 56
3
pressing clockwise and inwards.
–
Extract the bulb and fit the replacement so
that the lug on the base fits int
o the r
ecess
on the r
efl
ect
or.
–
Installation involves all of the above steps in
reverse sequence.
59
Loading ...
Loading ...
Loading ...