User Manual - Page 131

For ATECA 2019.

Loading ...
Loading ...
Loading ...
Visibility
Windscr
een cr
ack: the impact of a st
one
will trigger a singl
e wipe cycl
e with the rain
sensor on. Next the rain sensor detects the re-
duction in the sensitive surface area and
adapts accordingly. The behaviour of the
sensor will vary with the size of the damage
caused by the stone.
WARNING
The rain sensor may not detect enough rain
to switch on the wipers.
If necessary, swit
ch on the wipers man-
ually when water on the windscreen ob-
structs visibility.
Note
Clean the sensitive surface of the rain
sensor r
egularly and check the blades for
damage
››
Fig. 120 (arrow).
To remove wax and coatings, we recom-
mend a window cleaner containing alco-
hol.
Do not put stickers on the windscreen in
front of the rain sensor*. This may cause
sensor disruption or faults.
Mirrors
Int
erior mirr
or anti-dazzl
e function
Rear view mirror with automatic anti-daz-
zle function*
The anti-dazzle function is activated e
very
time the ignition is switched on.
When the anti-dazzle function is enabled, the
interior rear vision mirror will darken auto-
matically according to the amount of light it
receives. The anti-dazzle function is cancel-
led if reverse gear is engaged.
WARNING
In the event that an automatic anti-dazzle
rear vision mirror breaks, an electr
olyte flu-
id may leak. This could cause irritation to
the skin, eyes and respiratory organs. If you
come into contact with this liquid, it must
be rinsed with large quantities of water. If
necessary, get medial help.
CAUTION
In the event that an automatic anti-dazzle
rear vision mirror breaks, an electr
olyte flu-
id may leak. This liquid attacks plastic sur-
faces. Clean it with a wet sponge as soon
as possible.
Note
If the light incident in the interior rear vi-
sion mirror is obstructed (e
.g. with the sun
blind*), the anti-dazzle rear vision mirror
with automatic setting will not operate per-
fectly.
When the interior lights are on or reverse
gear engaged, the mirrors do not darken
with automatic adjustment for anti-dazzle
position.
If you have to stick any type of sticker on
the windscreen, do not do so in front of the
sensors. Doing so could prevent the anti-
dazzle function from working well or even
from working at all.
Adjusting the exterior mirrors
Fig. 121
Detail of the driver's door: control for
the e
xt
erior mirr
or
.
»
129
Loading ...
Loading ...
Loading ...