Loading ...
Loading ...
Loading ...
Driver assistance systems
●
OR: using the Easy Connect syst
em with
the butt
on
> SETTINGS > Driver as-
sistance
›››
page 89.
When the Front Assist is deactivated, the indi-
cation
›››
Fig. 258 will be shown on the in-
strument panel.
Activating or deactivating the pre-warning
(advance warning)
The advance warning can be activated or
deactivated in the Easy Connect system us-
ing button > SETTINGS > Driver as-
sistance
›››
page 89.
The system will store the setting for the next
time the ignition is switched on.
SEAT recommends keeping advance warning
active.
Depending on the vehicle’s infotainment sys-
tem the advance warning function may be
adapted in the following modes:
●
Advance
●
Medium
●
Delayed
●
Deactivated
SEAT recommends driving with the function in
“Medium” mode.
Switching distance warning on and off
The distance warning can be activated or
deactivated in the Easy Connect system us-
ing button > SETTINGS > Driver as-
sistance
›››
page 89.
The system will store the setting for the next
time the ignition is switched on.
SEAT recommends keeping the distance
warning active.
Deactivating Front Assist tempora-
rily in the following situations
In the following situations the Front Assist
shoul
d be deactiv
at
ed due t
o the syst
em's
limitations:
●
When the vehicle is to be towed.
●
If the vehicle is on a test bed.
●
When the radar sensor is damaged.
●
If the radar sensor receives a violent im-
pact.
●
If it intervenes several times unnecessarily.
●
If the radar sensor is temporarily covered
by an accessory.
●
When the vehicle is going to be loaded onto
transportation.
System limitations
Fig. 259
On the instrument panel display: ini-
tial syst
em self
-calibr
ation indication.
Front Assist has certain limitations inherent to
the syst
em. Thus, in cert
ain cir
cumst
ances,
some of the r
eactions may be inappropriate
from the driver's standpoint. So pay attention
in order to intervene if necessary.
The following conditions may cause the
Front Assist not to react or to do so too
late:
●
In the first few instants of driving after
switching on the ignition, due to the system’s
initial auto-calibration. During this period, a
status icon
›››
Fig. 259is displayed.
●
If the Front Assist is switched off or dam-
aged.
●
If the radar sensor is dirty or covered.
●
On taking tight bends or complex paths.
»
275
Loading ...
Loading ...
Loading ...