Loading ...
Loading ...
Loading ...
Driving
●
The system is not a replacement for driv-
er aw
areness. Supervise the parking ma-
noeuvre and the vehicle's surrounding area
at all times.
●
Do not be distracted from the traffic by
looking at the screen.
●
The images are only two-dimensional.
Protruding objects or holes in the road, for
example, are more difficult to detect or
may not be seen at all.
●
Vehicle load modifies the representation
of the guide lines
›››
Fig. 299. The width rep-
resented by the lines decreases with vehi-
cle load. Pay special attention to the sur-
roundings when the inside of the vehicle of
the luggage compartment are loaded.
●
In the following situations, objects or oth-
er vehicles appear to be further away or
closer than they actually are. Pay special
attention:
–
If moving from a flat surface to a slope
and vice-versa.
–
If the vehicle is heavily loaded.
–
When the vehicle approaches objects
that are not on the ground surface or
that protrude from it. These objects
may be outside the camera angle when
reversing.
Note
●
It is important to tak
e great care and pay
special attention if the driver is not familiar
with the system.
●
Reverse assist will not be available if the
rear lid is open.
Usage instructions
Fig. 298
In the rear lid handle: location of the
r
e
v
erse assist camer
a.
A camera installed in the rear lid handle as-
sists the driv
er with r
e
v
erse parking or ma-
noeuvring
›
››
Fig. 298.
The camera image is viewed together with
orientation lines projected on the Infotain-
ment system screen. Part of the bumper can
be seen at the bottom, which can be used by
the driver as a reference point.
Rear assist settings
Rear assist offers the user the possibility to
change the image's brightness, contrast and
colour settings.
To change these settings:
●
Stop the vehicle in a safe place without
switching off the ignition or the infotainment
system.
●
Apply the parking brake.
●
Select reverse gear.
●
Press the function button displayed on
the screen.
●
Make the desired adjustments on the menu
by pressing the –/+ function buttons or by
moving the scroll button.
Requirements for parking and manoeu-
vring with the rear assist
The system should not be used in the follow-
ing cases:
●
If the image displayed is not very reliable or
is distorted, or if the lens is dirty.
●
If the area behind the vehicle is incomplete.
●
If the vehicle is heavily loaded.
●
If the position of the camera has changed
after a rear-end collision. Have the system
checked by a specialised workshop.
322
Loading ...
Loading ...
Loading ...