Loading ...
Loading ...
Loading ...
Braking and parking
Using the blind spot detector (BSD)
with parking assist
ant (RC
T
A)
Activating and deactivating the blind spot
detector (BSD) with parking assistant
(RCT
A)
The blind spot detector with parking assistant
can be switched on and off by accessing the
Assistance systems menu on the dash
panel display using the steering wheel con-
trols. If the vehicle is equipped with a multi-
function camera, it can also be accessed by
means of the driver assistance systems key
located on the main beam headlight lever.
Open the Assistants menu.
●
Blind spot
●
Exit Assist
If the verification box on the control panel is
checked
, the functionality will be automat-
ically activated at ignition.
When the blind spot detector is ready to op-
erate, the indications in the external mirrors
will turn on briefly as confirmation.
When the vehicle is restarted, the last adjust-
ment in the system will remain active.
If the blind spot detector was automatically
deactivated, it will only be possible to restart
the system after turning the vehicle off and
restarting it.
Automatic deactivation of the blind spot
detector (BSD)
The radar sensors of the blind spot detect
or
with rear cross traffic alert will be automati-
cally deactivated when, among other rea-
sons, one of the sensors is detected to be
permanently covered. This may be the case
if, for example, there is a layer of snow or ice
in front of one of the sensors.
The relevant text message will appear in the
dash panel display.
Trailer mode
The Blind spot detector and the rear cross
traffic alert will be automatically deactivated
and it will be impossible to activate them if
the tow hitch is electrically connected to a
trailer or other similar object.
As soon as the driver starts to drive with a
trailer connected electrically to the vehicle, a
message will appear on the instrument panel
display indicating that the blind spot detector
and the rear cross traffic alert are deactiva-
ted. Once the trailer has been unhitched from
the vehicle, if you want to use the blind spot
detector and the rear cross traffic alert, you
will have to reactivate them in the corre-
sponding menu.
If the towing hitch is not factory equipped,
then the blind spot detector and the rear
cross traffic alert will have to be deactivated
manually when driving with a trailer.
Braking and parking
Br
aking syst
em
Contr
ol l
amps
It lights up red
Brake fluid level too low
›››
page 350 or fault in the
brake system.
Do not carry on driving!
It lights up red
Electronic parking brake
›››
page 297.
The w
arning lamp turns off when the handbrake is re-
leased.
It lights up green
Auto Hold function activated
›››
page 299.
It lights up yellow
Front brake pads worn.
Contact a specialised workshop immediately.
WARNING
●
If the brake warning lamp
does not go
out or if it lights up when driving, the brake
fluid level in the reservoir is too lo so there
is a risk of an accident
›››
page 350, Brake
fluid. Stop the vehicle and do not drive on.
Obtain technical assistance.
»
295
Loading ...
Loading ...
Loading ...