User Manual - Page 34

For ATECA 2019.

Loading ...
Loading ...
Loading ...
Safety
For those vehicles that do not include a
key l
ock switch to deactivate the airbag,
the vehicle must be taken to a technical
service. Do not forget to reconnect the air-
bag when an adult wants to sit in the front
passenger seat.
Never allow a child to be transported in a
vehicle without being properly secured, or
to stand up or kneel on a seat while travel-
ling. In an accident, the child could be flung
through the vehicle, causing possibly fatal
injuries to themselves and to the other vehi-
cle occupants.
Never leave a child alone in the child seat
or in the vehicle.
Children who are less than 1.5 metres tall
must not wear a normal seat belt without a
child seat, as this could cause injuries to
the abdominal and neck areas during a
sudden braking manoeuvre or in an acci-
dent.
When a child seat is mounted in the rear
seats, the door child-proof lock should be
activated
››
page 108.
Attachment systems
Depending on the country, different attach-
ment syst
ems ar
e used f
or saf
ely inst
alling
child seats.
Attachment systems overview
ISOFIX: ISOFIX is a standardised attach-
ment system allowing quick and safe attach-
ment of child seats in the vehicle. ISOFIX at-
tachment establishes a rigid connection be-
tween the child seat and the car body.
The child seat has two rigid attachment clips,
called connectors. These connectors are fit-
ted into the ISOFIX attachment rings found
between the seat cushion and the backrest
of the vehicle's back seat (on the sides). ISO-
FIX attachment systems are used mainly in
Europe
››
page 33. If necessary, ISOFIX at-
tachment may have to be supplemented with
a Top Tether belt or a support bracket.
Automatic three-point seat belt. When-
ever possible, it is preferable to attach the
child seats with the ISOFIX system rather than
attaching them with an automatic three-point
seat belt
››
page 36.
Additional attachment:
Top Tether: the Top Tether belt is guided
over the back of the rear seat and attached
to an anchor point with a hook. Anchor points
are located at the back of the rear seat back-
rest on the boot side
››
page 35. The rings
for retaining the Top Tether belt are marked
with an anchor symbol.
Support bracket: some child seats rest on
the floor of the vehicle with a support bracket.
The support bracket prevents the child seat
from tipping forward in the event of impact.
Child seats fitted with a support bracket
should only be used in the passenger seat
and side rear seats
››
. For the assembly of
this t
ype of seat you shoul
d al
so consult the
list of appr
o
ved vehicles for this assembly,
available in the instructions for child restraint
systems.
Recommended systems for attaching
child seats
SEAT recommends attaching child seats as
follows:
Baby carriers or child seats in the oppo-
site direction of travel: ISOFIX and support
bracket or i-Size.
Child seats in the direction of travel: ISO-
FIX and Top Tether.
WARNING
Incorrect use of the support bracket can
cause serious or fatal injury.
Make sure the suppor
t bracket is correct-
ly and safely installed.
32
Loading ...
Loading ...
Loading ...