Loading ...
Loading ...
Loading ...
Driver assistance systems
disconnect the ACC. This way you can
avoid possible damage. If this occurs have
it adjust
ed.
●
The sensor may not be adjusted correct-
ly if it receives an impact. This may com-
promise the system's efficacy or discon-
nect it.
●
Repairs to the radar sensor require spe-
cialist knowledge and special tools. SEAT
recommends visiting a SEAT dealership for
this purpose.
●
Clean away the snow with a brush and
the ice preferably with a solvent-free de-
icer spray.
ACC operation
Fig. 264
On the left of the steering column:
oper
ating the ACC with the thir
d l
e
v
er.
Fig. 265 On the left of the steering column:
operating the ACC with the third lev
er.
When the ACC is connected, the green con-
tr
ol l
amp
will light up on the instrument
panel, and the pr
ogrammed speed and ACC
status will be displayed
›››
Fig. 262.
What ACC settings are possible?
●
Connecting and activating the ACC
›››
page 279.
●
Setting your speed
›››
page 279.
●
Setting your distance
›››
page 280.
●
Disconnecting and deactivating the ACC
›››
page 280.
●
Adjusting the default distance level at the
start of your journey
›››
page 280.
●
Adjusting the driving profile
›››
page 280.
●
Conditions in which the ACC does not re-
act
›››
page 280.
Connecting and activating the ACC
To connect and activate the ACC, the posi-
tion of the gearbox lever, the vehicle speed
and the position of the third level of the ACC
must all be taken into account.
●
With manual transmission, the gear lever
must be in any gear except first. With auto-
matic transmission, the gear lever must be in
position D or S. Speed must be higher than
30 km/h (18 mph) approx.
●
To activate the ACC, move the third lever to
position
›››
Fig. 264
1
. At this time, the
ACC is not activ
e and ther
e is no pr
ogr
am-
med speed.
●
Ne
xt, press button
›››
Fig. 265
B
or
mo
v
e the l
e
v
er to position
›››
Fig. 264
2
. At this moment the ACC is ac-
tiv
at
ed and the curr
ent speed and dist
ance
ar
e programmed. The picture in the box will
change to Active mode
›››
Fig. 262 .
While ACC is active, the vehicle travels at a
set speed and distance from the vehicle
ahead. Both speed and distance can be
changed at any time.
Setting speed
●
To set the speed, move the third lever up
+
or down
–
to the desired speed
›
›
›
Fig. 262
6
. The speed adjustment is
made at 10 km/h (6 mph) int
erv
al
s.
»
27
9
Loading ...
Loading ...
Loading ...