User Manual - Page 320

For ATECA 2019.

Loading ...
Loading ...
Loading ...
Driving
Certain objects may not be shown or may
not be sho
wn very clearly, for example,
posts or thin rails, due to the screen resolu-
tion or if light conditions are insufficient.
The cameras have blind spots in which
obstacles and people are not registered.
The camera lens must be kept free, with-
out snow or ice, and should not be covered.
WARNING
The smart technology incorporated into
the T
op View Camera* system cannot o
ver-
come the limits imposed by the laws of
physics and it only works within the limits of
the system. The greater convenience provi-
ded by the Area View system should never
tempt you to take any risk that may com-
promise safety. If used negligently or invol-
untarily, it may cause serious accidents
and injuries. The system is not a replace-
ment for driver awareness.
Adapt your speed and driving style to suit
visibility, weather, road and traffic condi-
tions.
Do not be distracted from the traffic by
looking at the screen.
Monitor the area around the vehicle at all
times, since the cameras do not capture
small children, animals and certain objects
in all situations.
The use of a number plate may interfere
in the views shown on the screen, since the
cameras' field of vision may be reduced.
The system will probably be unable to
r
epresent all areas clearly.
CAUTION
The camer
a images are only two-dimen-
sional. Due to a l
ack of spatial depth, ob-
jects that jut out or holes on the road, for
example, are more difficult to detect or
may not be seen at all.
In certain circumstances, the camera
does not capture objects such as beams,
fences, posts or thin trees, which could
damage the vehicle.
The system displays the auxiliary lines
and boxes regardless of the vehicle's envi-
ronment, no objects are detected. The driv-
er is responsible for determining that the
vehicle will fit in the parking space.
CAUTION
In order to guarantee good system opera-
tion, keep the cameras clean, free of sno
w
or ice, and do not cover them with adhe-
sives or other objects.
Never use abrasive cleaning products to
clean the camera lenses.
Do not use hot or warm water to remove
ice or snow from the camera lenses. Doing
so could damage the lenses.
Area View system
Fig. 295
Viewing the top view system: aerial
vie
w
.
There are four different views to choose from:
Fr
ont camer
a ar
ea
Right camer
a ar
ea
Rear camera area
Left camera area
Function buttons Fig. 295:
Exit the current display.
Adjust the display: bright, contrast and
colour.
Three-dimensional views
Depending on the equipment: connect-
ing and disconnecting the ParkPilot
sound.
A
B
C
D
318
Loading ...
Loading ...
Loading ...